26 mm (1″), Adapted for SDS-PLUS bits
26 mm (1″) 2.2 J Combination Hammer with HEPA Self Dust Collection, SDS-PLUS Bits
- 6 mm (1″) 2.2 J Combination Hammer with HEPA Self Dust Collection, SDS-PLUS Bits.
- Filter Cleaning Mechanism for More Efficient Drilling.
- HEPA filter removes particles with an efficiency rating of 99.75%.
- Dust collecting port on telescopic guide with a sliding range of 190 mm enables to accept longer drill bits.
- Secure connection between dust case and dust collecting section for less dust leakage.
- See-through dust case for easy checking of collected dust amount.
- Easy dust case removal for convenient dust disposal and cleaning.
- Easy to adjust position of dust collecting port.
- A desired drilling depth can be obtained simply by sliding a push button on telescopic guide.
- Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
- Soft grip provides more comfort and control.
- Powerful 800 W motor delivers 2.2 J (EPTA-Procedure 05/2009) of impact energy to handle the most demanding applications.
- Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection.
- 3-mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications.
- Variable speed trigger allows operator to adjust speed based on materials or application.
- Depth gauge for increased drilling consistency.
Impact Energy :
- EPTA-Procedure 05/2009: 2.2 J
- Our experimental conditions: 2.9 J
-
Blows Per Minute (BPM) : 0 – 4,600
-
Sound Pressure Level : 91 dB(A)
-
Sound Power Level : 102 dB(A)
-
Noise K Factor : 3 dB(A)
-
Vibration Level :
Chiselling Function w/ Side Grip: 9.5 m/s²
Drilling into Metal: 2.5 m/s²
Hammer Drilling into Concrete: 12.5 m/s²
-
Vibration K Factor :
Chiselling Function w/ Side Grip: 1.5 m/s²
Drilling into Metal: 1.5 m/s²
Hammer Drilling into Concrete: 1.5 m/s²
-
Dimensions (L x W x H) :604 x 89 x 260 mm (23-3/4 x 3-1/2 x 10-1/4″)
-
Net weight : 3 – 4.3 kg (6.7 – 9.4 lbs.)
-
Power supply cord : 2.5 m (8.2 ft.)
Standard Accessories:
- Side Grip, Depth Gauge, Sealing Cap