16 mm (5/8″) 710 W Hammer Drill with Keyed Chuck
- Powerful 710 W motor with 0-3,200 RPM & 0-48,000 IPM for the most demanding applications
- Soft grip handle provides increased comfort on the job
- Industrial aluminum gear housing for durability and long tool life
- In-line positive grip design maximises power thrust
- Keyless chuck for easy bit installation and removal (HP1631)
- Lightweight with large drilling capacity up to 16 mm in concrete
- Large 2-finger trigger for added convenience
- Recessed lock-on button for continuous use
- Reversing switch is conveniently located
- 360° Swivel side handle
- Variable speed control dial enables user to match the speed to the application
- 2-mode operation for “Rotation Only” or “Hammering with Rotation” for multiple applications
- Ideal for small self anchoring concrete screws
- Double insulated
- Depth gauge for increased drilling consistency (country-specific)
Technical information:
Continuous rating input : |
710W |
||||
Capacities: |
Concrete: 16 mm (5/8″) Steel: 13 mm (1/2″) Wood: 30 mm (1-3/16″) |
||||
Chuck Capacity : |
1.5 – 13 mm (1/16 – 1/2″) |
||||
Blows Per Minute (BPM) : |
0 – 48,000 |
||||
No Load Speed (RPM): |
0 – 3,200 |
||||
Vibration Level :
|
Hammer Drilling into Concrete: 17.0 m/s² Drilling into Metal: 2.5 m/s² |
||||
Vibration K Factor : |
1.5 m/s² |
||||
Sound Pressure Level : |
97 dB(A) |
||||
Sound Power Level : |
|
||||
Noise K Factor : |
3 dB(A) |
||||
Dimensions (L x W x H) : |
296x75x204 mm (11-5/8″x2-15/16″x8″) |
||||
Net weight : |
2.1 kg (4.6 lbs.) |
||||
Power supply cord : |
2.0 m (6.6 ft) |
Standard Accessories:
- Side Handle, Chuck Key, Chuck Key Holder, Depth Gauge (country-specific)