26 mm (1″) 2.3 J Combination Hammer, SDS-PLUS bits
- High performance and durability at less expense
- Satisfactory performance: the same feeling of powerful chipping as PUMPKIN PTT2-26DFR
- 3-Mode operation for “Rotation Only”, “Hammering with Rotation” or “Hammering Only” for multiple applications
- Re-located operating mode lever for increased protection and durability
- Improved bit guide for increased bit stability during drilling applications
- Easy-to-grip handle gives maximum power thrust and provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
- Soft grip provides more comfort and control
- Powerful 800 W motor delivers 2.3 J of impact energy to handle the most demanding applications
- Torque limiter stops rotation if bit jams for increased operator safety and enhanced motor protection
- Forward/reverse lever – position of the switch allows brushes to be positioned so that the drill maintains same speed and torque in forward and reverse
- Variable speed trigger allows operator to adjust speed based on materials or application
- One-touch sliding chuck for easy bit installation and removal
- Depth gauge for increased drilling consistency
- Recessed lock-on button for continuous use
- Double insulated
Technical Information:
Continuous rating input : |
800W |
||||
Impact Energy : |
EPTA-Procedure 05/2009: 2.3 J Our experimental conditions: N/A J |
||||
Capacity: |
Concrete: 26 mm (1″) Core Bit: 68 mm (2-11/16″) Diamond Core Bit (Dry Type): 80 mm (3-1/8″) Steel: 13 mm (1/2″) Wood: 32 mm (1-1/4″) |
||||
Blows Per Minute (BPM) : |
0 – 4,500 |
||||
No Load Speed (RPM) : |
0 – 1,200 |
||||
Vibration Level : |
Hammer Drilling into Concrete: 16.5 m/s² |
||||
Sound Pressure Level : |
90 dB(A) |
||||
Sound Power Level : |
|
||||
Noise K Factor : |
3 dB(A) |
||||
Dimensions (L x W x H) |
362x71x194 mm (14-1/4″x2-13/16″x7-5/8″) |
||||
Net weight : |
2.7 – 3.1 kg (6.0 – 6.8 lbs.) |
||||
Power supply cord : |
4.0 m (13.1 ft.) |
Standard Accessories:
- Side Grip, Depth Gauge, Bit (country-specific)