18V LXT BL Brushless Cordless 3-Speed 1/2″ (12.7 mm) 280 N·m (210 ft.lbs.) Impact Wrench, Reverse Rotation Auto Stop Mode
- Reverse Rotation Auto Stop Mode Stops Rotation and Impact in 0.2 Seconds when Fastener is Loosened Adequately to Prevent Bolt/Nut Get Lost
- BL motor delivers 280 N·m (210 ft.lbs.) of max torque
- BL motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
- BL motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life
- BL motor efficiently uses energy to match torque and RPM to the changing demands of the application
- 3-speed power selection switch (0-1,600 / 0-2,100 / 0-2,800 RPM & 0-1,800 / 0-2,600 / 0-3,500 IPM) for precise fastening control in a wide range of applications
- Compact and ergonomic design at only 147 mm (5-3/4″) long
- Lightweight for reduced operator fatigue
- 3-stage LED gauge indicates battery charge level
- Extreme Protection Technology (XPT) is engineered to provide improved dust and water resistance for operation in harsh conditions
- Electric brake for increased operator safety
- Built-in LED light with an independent on/off switch & pre-glow/afterglow functions illuminates the work area
- Phosphorescent bumper glows in dark places
- Ergonomically designed handle with soft grip provides increased comfort on the job
- Variable speed control by trigger for precise fastening in a wide variety of applications
- Reversing switch is conveniently located
- Hammer case cover securely fastened with four bolts
- Durable, reversible belt clip convenient for temporary tool hanging
- Battery protection circuit protects against overloading, over-discharging and over-heating. Powered by Makita 18V LXT Li-Ion battery.
Technical Information:
Fastening Capacities: |
Standard Bolt: M10 – M20 (3/8″ – 3/4″) High Strength Bolt: M10 – M16 (3/8″ – 5/8″) |
Square Drive: |
12.7 mm (1/2″) |
No Load Speed (RPM): |
Hard / Med / Soft: 0 – 2,800 / 0 – 2,100 / 0 – 1,600 |
Impacts Per Minute (IPM): |
Hard / Med / Soft: 0 – 3,500 / 0 – 2,600 / 0 – 1,800 |
Max Fastening Torque: |
280 N·m (210 ft.lbs.) |
Vibration Level: |
Impact tightening of fasteners of the maximum capacity of the tool: 11.5 m/s² |
Vibration K Factor: |
Impact tightening of fasteners of the maximum capacity of the tool: 1.5 m/s² |
Sound Pressure Level: |
96 dB(A) |
Sound Power Level: |
107 dB(A) |
Noise K Factor: |
3 dB(A) |
Dimensions (L x W x H): |
147x79x249 mm (5-3/4″x3-1/8″x9-3/4″) |
Net weight: |
1.5 – 1.8 kg (3.2 – 3.9 lbs.) |
Standard Accessories:
- Belt Clip, Battery, Charger