Goot - Temperature-Controlled Lead-Free Soldering Station - RX-802AS.
SKU
rx_802as
In stock
Overview
Lead Free Antistatic Digital Display Microprocessor controlled Temp. Controlled with Heavy duty Stand, 6 seconds to set temperature. The ultimate solution for lead-free soldering.
- Reaches set temperature in just "6 sec" after turning power on. No wasted time.
- Easy to replace tip without using tool-No need for heat resistant pads / tools when changing the tip.
- Excellent heat recovery-Even during continuous work the temp of the Irontip remain close to set temp.
- Thick iron plating - All tips with thick iron planting to slow erosion caused by lead free soldering.
Reduced Grip Heat
Patented thermal-insulation grip permits comfortable and safe work.
Thick Tip Coating for Lead-free Soldering
All tips have extra-thick iron plating, to resist erosion by lead-free solder.
Tip Replacement without Tools (PAT.)
Slide-change tip. Easy to replace a hot tip without any other tools.
Fastest in Its Class
Reaches set temperature in just 6 seconds after turning power on.
Excellent Heat Recovery (PAT.)
There is almost no temperature fluctuation during continuous operation. Good for lead-free soldering.
| Model | RX-802AS |
|---|---|
| Voltage | 110V,120V,130V,220V,230V,240V AC 50/60Hz |
| Power Consumption | 80W |
| Power Cord Length | 1.2m |
| Temperature Setting Range | 50–450°C |
| Ripple temperature | ±5?C (unloaded) |
| Insulation Resistance | Over 100MΩ (500V DC) |
| Accessories | Soldering Iron Stand (ST-21) |
| Output Voltage | 24V AC |
|---|---|
| Dimensions | 115(W) × 98(H) × 146(D)mm |
| Weight | 1.8kg |
| Voltage/Consumption | 24V AC / 72W |
|---|---|
| Ground Resistance | Less than 2Ω |
| Leak Voltage | Less than 2mV |
| Heater | Nichrome heater |
| Cord Length | 1.2m |
| Length | 158mm (with RX-80HRT-MB) |
| Weight | 28g (with RX-80HRT-MB) |
₹ 30,500.00
