• - 0%

Metravi - DIT-916 DIGITAL INSULATION TESTER

SKU
dit-916
In stock
Overview

Digital Insulation Tester for 500V / 1000V / 2500V / 5000V & 1T.Ohms with USB PC Interface cable and software

  • Test insulation of wires, cables, transformers, motors, surge arrestors and generators
  • Selectable testing voltages - one testing instrument for low and high voltage systems from 500/1000/2500 and 5000V
  • Insulation resistance measurement up to 1T ?
  • User selectable programmable timer (10s to 30 min)
  • Automatic discharge of test object after completion of measurement
  • Diagnostic tools
  • Polarization index (PI)
  • Dielectric absorption ratio (DAR)
  • USB PC Interface
  • Comparison feature to set pass/fail thresholds for quick measurement and verification
  • Dual power source – receptacle or batteries
  • Built in internal memory storing 18 measurements
  • Comes as a complete kit: power adapter, software, USB interface cable, hard carrying case, batteries, complete set of test leads, and instruction manual
  • CAT III 600V
  • Confir cmes to: IEC 61010 CAT.III 600V overvoltage and double insutation standard
  • Display (LCD) : Digital : 9999 counts Analog bar graph
  • Display Backlight : Bright Backlight for clear readings in poorly lighted areas
  • Computer Connection : Via USB interface
  • Data Logging and Recall : 18 sets
  • Auto Range : The meter automatically selects best range
  • Warning : Displayed on the instrument
  • Test Voltage : Automatically source the voltage
  • COMP Measurement : Used for Compare function to set a pass/fail compare level for the insulation measurement
  • PI Measurement : Polarization Index is the ratio of insulation resistance. Preset the time for two points and the Meter will carry out the measurement automatically
  • Time : To carry out measurement by setting a specificed time within 15 minutes
  • Over Loading : Display OL on insulation resistance range
  • Battery Indicator : Low Battery indication
  • Battery type : 8pcs of 1.5V (LR14) batteries or power adaptor (input voltage 230V, 50/60Hz, 150mA, input DC15V, 1.0A)Power adaptor is optionally at extra cost
  • Dimensions (HxWxL) : 202 x 155 x 94 mm Weight : Approx. 2kg (including battery)
  • ₹ 34,800.00
    -
    +

    Digital Insulation Tester for 500V / 1000V / 2500V / 5000V & 1T.Ohms with USB PC Interface cable and software

  • Test insulation of wires, cables, transformers, motors, surge arrestors and generators
  • Selectable testing voltages - one testing instrument for low and high voltage systems from 500/1000/2500 and 5000V
  • Insulation resistance measurement up to 1T ?
  • User selectable programmable timer (10s to 30 min)
  • Automatic discharge of test object after completion of measurement
  • Diagnostic tools
  • Polarization index (PI)
  • Dielectric absorption ratio (DAR)
  • USB PC Interface
  • Comparison feature to set pass/fail thresholds for quick measurement and verification
  • Dual power source – receptacle or batteries
  • Built in internal memory storing 18 measurements
  • Comes as a complete kit: power adapter, software, USB interface cable, hard carrying case, batteries, complete set of test leads, and instruction manual
  • CAT III 600V
  • Confir cmes to: IEC 61010 CAT.III 600V overvoltage and double insutation standard
  • Display (LCD) : Digital : 9999 counts Analog bar graph
  • Display Backlight : Bright Backlight for clear readings in poorly lighted areas
  • Computer Connection : Via USB interface
  • Data Logging and Recall : 18 sets
  • Auto Range : The meter automatically selects best range
  • Warning : Displayed on the instrument
  • Test Voltage : Automatically source the voltage
  • COMP Measurement : Used for Compare function to set a pass/fail compare level for the insulation measurement
  • PI Measurement : Polarization Index is the ratio of insulation resistance. Preset the time for two points and the Meter will carry out the measurement automatically
  • Time : To carry out measurement by setting a specificed time within 15 minutes
  • Over Loading : Display OL on insulation resistance range
  • Battery Indicator : Low Battery indication
  • Battery type : 8pcs of 1.5V (LR14) batteries or power adaptor (input voltage 230V, 50/60Hz, 150mA, input DC15V, 1.0A)Power adaptor is optionally at extra cost
  • Dimensions (HxWxL) : 202 x 155 x 94 mm Weight : Approx. 2kg (including battery)
  • More Information
    Product Model No DIT-916
    Brand Metravi
    Write Your Own Review
    You're reviewing:Metravi - DIT-916 DIGITAL INSULATION TESTER
    Your Rating