Ergonomic design for powerful torque
-
⌀10mm iron core penetrates the handle, so the hammer impact can be transmitted directly to the tip.
-
With 13mm Hex. (Across Flats) bolster, works with a wrench to increase the (un)tightening torque.
-
Compatible with 6.35mm (1/4 inch) bits
DZ-71
GO-THROUGH DRIVER
Extractor Bit contained :
Press & Twist type Bit to
remove #2 Phillips screw (DBZ-51)
Target Screws for DBZ-51
Flat & Round Head M3~5
Dome Head M4~5
4 edges of the cross tip can firmly grip
the remaining corners of Phillips recess.